BFVYF - FC-75 FLORINERT ELECTRONIC LIQUID
- MSDS: BFVYF
- Manufacturer: COMMERCIAL CHEMICALS DIV THE 3M COMPANY
- Product Name: FC-75 FLORINERT ELECTRONIC LIQUID
- National Stock Number: 6850-00-905-9098
Product Identification
Product ID:FC-75 FLORINERT ELECTRONIC LIQUID
MSDS Date:01/01/1985
FSC:6850
NIIN:00-905-9098
MSDS Number: BFVYF
Responsible Party
Emergency Phone: 612-733-1110
Cage: 4B217
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
FLUOROCARBONS (FLOROCARBONS & FLUOROCARBON ETHERS WHEN
FLUOROCARBON ETHERS
Hazards
Effects of Overexposure:SKIN & EYE IRRITATION. NON-TOXIC BY INGESTION.
HAZS ASSOC WITH INHAL OF VAP AT LOW TEMP IS LOW.
First Aid
First Aid:EYES: FLUSH WITH H*2O FOR 15 MIN. SKIN: WASH AFFECTED AREA
WITH SOAP & H*2O. INHALATION: REMOVE PERSON TO FRESH AIR.
INGESTION: INDUCE VOMITING & CALL PHYSICIAN.
Fire Fighting
Flash Point:NONE, PMCC
Extinguishing Media:NON FLAMMABLE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TOXIC BY-PRODUCTS INCLUDING HYDROGEN
FLUORIDE MAY FORM.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL TO SOAK UP SPILL.
Handling
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF CONC VAPORS.
USE ONLY IN AREAS WELL VENTILATED TO PREVENT VAP BUILDUP. DO NOT
SMOKE WHEN USING PRODUCT. AVOID INHALATION OF THERMAL DECOMP
PRODUCTS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF REQUIRED
Ventilation:RECOMND FOR APPLICATIONS INVOLVING TEMPS > 392F; 200C.
Protective Gloves:RUBBER
Supplemental Safety and Health
CONTAINER SIZE- 5 GAL SIZE. DISPOSALS- BURNING SMALL QUANTITIES IN CHEM
WASTE INCINERATOR IS POSSIBLE, WILL CAUSE FORMATION OF TOXIC &
CORROSIVE DEGRADATION PROD. DISPOSE IAW FED,ST & LOC REGS
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:210-225F
Vapor Pres:31
Vapor Density:14
Spec Gravity:1.76
Evaporation Rate & Reference:1 (BUAC= 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, ODORLESS LIQUID
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI METALS
Hazardous Decomposition Products:THERMAL DECOMP PRODUCES TOXIC HF &
PERFLUOROISOBUTYLENE
Disposal
Waste Disposal Methods:MFR RECOMMENDATION: BURY ABSORBED PRODUCT IN
LANDFILL. DISPOSE OF SMALL AMOUNTS, < 1 GALLON, BY EVAPORATING IN A
HOOD. LARGE AMOUNTS MAY BE RECLAIMED OR RETURNED TO 3M FOR
DISPOSAL. CONTACT 3M FOR REC LAMATION INFORMATION. SEE SUPP DATA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.